Unavailable

NOTE: The D38 is no longer available and has been replaced by the microStar™ M. This page is for reference only. For new installations, find information on the microStar™ M here.

D38 Microwave Motion SensorHPR Logo

SafePath™ D38
Microwave Motion Sensor with HPR™

HUMAN PRESENCE RADAR™ (HPR™) PROVIDES ADDITIONAL LEVEL OF MOTION DETECTION AFTER INITIAL DOOR ACTIVATION

 

UNIDIRECTIONAL & BIDIRECTIONAL, NARROW & WIDE PATTERNS AND VARIABLE ELEVATION, ALL IN ONE UNIT

 

TWO PLANAR ANTENNA INCLUDED

 

CAN BE MOUNTED UP TO 15 FEET ABOVE FLOOR

 

EASY TO INSTALL AND SET-UP WITHOUT EXTERNAL PROPRIETARY DEVICES

 

The SafePath™ D38 with patented Human Presence Radar™ (HPR™) is the latest advancement in microwave motion detection for automatic doors. It is the only microwave sensor that provides protection for a person who enters the door activation zone and then slows to an extremely slow pace or stops. The D38 can provide this extra level of protection because HPR allows it to actually detect two separate rates of motion simultaneously.

 

Like other conventional microwave sensors, for the D38 to activate an automatic door it utilizes Doppler shift radar to detect movements of at least 2" per second. However, once the door has been activated the D38's second level of detection — Human Presence Radar™ — is enabled. Now motion down to 1/4" per second can be detected. This means with HPR™ enabled, persons virtually standing still will continue to be detected anywhere in the detection zone.

 

Since conventional Doppler shift radar must initially activate the door before enabling Human Presence Radar™ there is no additional chance for false activation of the door because HPR™ alone cannot activate the door.

 

Human Presence Radar™ gives slow moving, elderly or disabled persons the confidence that once they have been initially detected, they can safely approach an automatic door at any speed without the door closing prematurely.