ClearPath LogoClearPathâ„¢ CP/RX Receiver
ClearPath™
Radio Control Receivers

ClearPath™ RADIO CONTROL SWITCHES WITH HDRC™ SOLVE PROBLEMS CAUSED BY INTERFERENCE AND STRAY SIGNALS—AND ARE GUARANTEED TO WORK WHERE OTHERS WON'T

 

ClearPath™ PRODUCTS ARE FCC LICENSED AND COMPATIBLE WITH PREVIOUS MS SEDCO DEVICES AS WELL AS WITH THE PRODUCTS OF MANY OTHER MANUFACTURERS

 

5 PROGRAMMING MODES:

  • Mode 1: Standard Receiver
  • Mode 2: Receiver with Adjustable Time Delay (5, 10, 15, 20 seconds)
  • Mode 3*: Dual Channel Receiver
  • Mode 4*: Receiver with Sequenced Outputs
  • Mode 5**: Receiver with Ratchet Relay

 

*Both Modes 3 and 4 require the CP/RXM. This module plugs directly onto the CP/RX main circuit board and provides a second output

 

**Mode 5 requires the CP/RXR. This module plugs directly onto the CP/RX main circuit board and provides the ratchet relay feature.

 

COMPACT SIZE (4"L x 2"W x 1"H)

 

HDRC LogoThe ClearPath™ Radio Control Door Activation System provides the most reliable wireless activation of automatic doors available. To accomplish this, the ClearPath™ product line features several advances, the most important of which is three selectable frequencies built into each product: HDRC™, 300 MHz and 390 MHz.

 

High Definition Radio Control™ (HDRC™) is the latest breakthrough in radio frequency (RF) signal transmission from MS SEDCO. Unlike conventional RF systems in use today, HDRC™ uses sophisticated componentry that transmits a fixed frequency signal that will not distort due to outside interference. The fixed signal is then transmitted through a proprietary electronic "filter" in the receiver ensuring door activation occurs. For added versatility, each ClearPath™ device also includes the two most widely used conventional frequencies, 300 MHz and 390 MHz. A simple slide of a switch allows the ClearPath™ product line to be used interchangeably with all past MS SEDCO products and other manufacturers products that operate at these frequencies.

 

The ClearPath™ transmitters share the same printed circuit board (PCB), come prewired and installed with a battery in a mounting box and feature the above MS SEDCO exclusive advantages.