ClearPath™ RADIO CONTROL SWITCHES WITH HDRC™ SOLVE PROBLEMS CAUSED BY INTERFERENCE AND STRAY SIGNALS—AND ARE GUARANTEED TO WORK WHERE OTHERS WON'T

ClearPath™ PRODUCTS ARE FCC LICENSED AND COMPATIBLE WITH PREVIOUS MS SEDCO DEVICES AS WELL AS WITH THE PRODUCTS OF MANY OTHER MANUFACTURERS

THREE SELECTABLE FREQUENCIES IN ONE DEVICE (HDRC™, 300 MHz & 390 MHz)

5 PROGRAMMING MODES:

• Mode 1: Standard Receiver
• Mode 2: Receiver with Adjustable Time Delay (5, 10, 15, 20 seconds)
• Mode 3*: Dual Channel Receiver
• Mode 4*: Receiver with Sequenced Outputs
• Mode 5**: Receiver with Ratchet Relay

*Both Modes 3 and 4 require the CP/RXM. This module plugs directly onto the CP/RX main circuit board and provides a second output

**Mode 5 requires the CP/RXR. This module plugs directly onto the CP/RX main circuit board and provides the ratchet relay feature.

COMPACT SIZE (4"L x 2"W x 1"H)

The ClearPath™ Radio Control Door Activation System provides the most reliable wireless activation of automatic doors available. To accomplish this, the ClearPath™ product line features several advances, the most important of which is three selectable frequencies built into each product: HDRC™, 300 MHz and 390 MHz.

High Definition Radio Control™ (HDRC™) is the latest breakthrough in radio frequency (RF) signal transmission from MS SEDCO. Unlike conventional RF systems in use today, HDRC™ uses sophisticated componentry that transmits a fixed frequency signal that will not distort due to outside interference. The fixed signal is then transmitted through a proprietary electronic "filter" in the receiver ensuring door activation occurs. For added versatility, each ClearPath™ device also includes the two most widely used conventional frequencies, 300 MHz and 390 MHz. A simple slide of a switch allows the ClearPath™ product line to be used interchangeably with all past MS SEDCO products and other manufacturers products that operate at these frequencies.

The ClearPath™ receiver provides three selectable frequencies HDRC™, 300 MHz and 390 MHz. In addition to being a selectable frequency receiver, the CP/RX is a sophisticated timer that can not only be used to activate automatic doors but can be used to directly release electric locking devices or sequence electric locking devices on automatic doors without any additional relays or timers. Finally, the CP/RX can be programmed so that, upon receiving an initial signal, the relay remains closed until a second signal is received (ratchet relay).

Click on the link below to download the complete ClearPath™ data sheet and/or installation instructions:

ClearPath™ Data Sheet (pdf format)

CP/RX Installation Instructions (pdf format)